Trees like an oak tree, hickory pines, and palm trees can help in making a beautiful landscape. These beautiful trees can add attractive features in your home. Otherwise, they can create a nuisance around your house. The weak trees can be easily uprooted by strong winds and storms.
For instance, the pest infested tree can be uprooted by the storm. It can create havoc and can lead to a major hazard. If you want to prevent your home and your family members from the hazard, then you should remove the pest-infested or weak trees from your yard.
Here, in this article, we will discuss various tips and tricks to safely cut down a tree in your yard:
- Find the Rules & Regulations
It is very important to determine the rules and regulations before starting the tree cutting process. In various states, the tree cutting process is regulated. Therefore, it is recommended that you should check the legal and safety rules in advance. It is imperative to adhere to rules and regulations.
- Examine Tree Thoroughly
You should properly inspect the tree to find out any potential danger. You should determine how wide it is? It is imperative to determine in which direction the tree is about to call. You should also check the electric wires in its surrounding.
You should notice each and everything so that you can make a perfect plan. You should use your observations to create a perfect plan and make the right decision. You should hire tree cutting professionals such as tree cutting Sydney contractors.
- Planning
You should measure the height of the tree and use this data to determine the fall area around the tree. The height of the tree can be considered as the radius of the area around that tree. You should properly clear the obstacles around the tree, such as a vehicle, equipment, or any other thing that is lying inside the radius. Now, you should determine the direction in which the tree will fall. Also, you should find out the way to escape in case of an emergency.
- Cut Down Dangerous Branches
You should bind the dangerous branches of the tree with the tree trunk. It will prevent the people around the tree. In worst-case scenarios, the tree branches may fall during tree cutting and wreak havoc. You must form the lasso around the weak and dangerous branches of the tree. It is recommended to tighten the lasso and warp the roper around the branch of the trees.
- Form A V-shaped notch
You should follow proper full safety measures before starting the tree cutting process. It is imperative to wear safety gear to prevent yourself from a major hazard. The tree cutting professionals should wear safety such as gloves, safety helmet, and goggles.
After that, you should turn the chainsaw to form the V-shaped notch. It is recommended to form this V-shaped notch on the side of the tree in which the tree will fall. If you want to make a large notch, then you should make a diagonal cut in the downward direction.
You have to continue the process until you reach the half of the tree’s girth. Make sure that the length of the cut should be equal to one-quarter of the total diameter of the tree trunk. After completing the first diagonal cut, you should proceed to the second diagonal cut.
The second diagonal cut should be started from the other side of the tree, and it should meet the endpoint of the first diagonal cut. Consequently, you will have a V-shaped notch. Finally, remove the wedge of the wood.
- Back-Cut on The Tree
Now, this is the last stage to cut down the tree. The back cut will give a final blow and result in tree tumbling. To make a back cut on the tree, you should go on the opposite side of the tree. You should make a back-cut a slightly higher than the apex of the undercut V-shaped notch.
Make a horizontal cut at this point of the tree. This horizontal cut should be 8 inches deep. You should leave space between the final back-cut and the undercut. This available space is known as the hinge and it will help the tree to fall naturally. The undercut will force the tree to fall in the intended direction.
Final Stage:
When the tree falls, then you have to do the final step. In the last step, you have to get rid of the hinge by chopping. Chop away the hinge and the remaining tree stump into small size chunks of wood. You should continue this process until you reach the ground.
